{"product_id":"fox-suspension-mounting-hardware-crush-washer-ss-10mmx5994mm2360","title":"Fox Suspension Mounting Hardware Crush Washer SS 10MM X 59.94MM\/2.360","description":"\u003cstrong\u003eFOX - MOUNTING HARDWARE\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf your rear shock already has the metal hardware pieces pressed into the top and bottom eyelets, follow these steps:\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e1. Measure the Width:\u003c\/strong\u003e Place the calipers on the outside edges of the hardware. Measure the \u003cstrong\u003etotal width from side to side\u003c\/strong\u003e in millimeters (e.g., 22mm, 30mm).\u003cbr\u003e\u003cstrong\u003e2. Measure the Hole:\u003c\/strong\u003e Measure the \u003cstrong\u003einside diameter of the inner sleeve hole\u003c\/strong\u003e where the bolt passes through (typically 6mm, 8mm, or 10mm).\u003cbr\u003e\u003cbr\u003e\u003cem\u003eE.g:\u003c\/em\u003e If your total width is 22mm and the hole is 8mm, your hardware size is \u003cstrong\u003eM8 x 22mm\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIf you are building up a bare frame or the old hardware is worn or missing, you can measure the frame tabs directly:\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e1. Measure the Frame Gap:\u003c\/strong\u003e Insert the inside-measuring jaws of your calipers between the frame's mounting tabs where the shock sits. Measure the \u003cstrong\u003einternal width\u003c\/strong\u003e in millimeters.\u003cbr\u003e\u003cstrong\u003e2. Measure the Bolt:\u003c\/strong\u003e Take the frame's shock mount bolt and measure the \u003cstrong\u003eoutside diameter of the smooth shaft\u003c\/strong\u003e (not the threaded tip).\u003cbr\u003e\u003cbr\u003e\u003cem\u003eNote:\u003c\/em\u003e \u003cstrong\u003eAlways check both ends!\u003c\/strong\u003e The front frame mount (top of the shock) and rear frame mount (bottom of the shock) often use completely different widths. Be sure to measure both.","brand":"Fox Suspension","offers":[{"title":"Default Title","offer_id":43150441775200,"sku":"FP_57583","price":61.4,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5541\/6928\/files\/MediumProduct_CSZMMVkernel_400871.jpg?v=1789443406","url":"https:\/\/missioncycles.co.nz\/products\/fox-suspension-mounting-hardware-crush-washer-ss-10mmx5994mm2360","provider":"Mission Cycles","version":"1.0","type":"link"}